Products

DESCRIPTION

Basic Info.

Model NO.	201 304 316L
Delivery	7 Days After Order
Certificates	SGS, TUV and Mtc
Transport Package	Metal Pallet Standard Export Package
Specification	0.5-3.0mm
Trademark	TISCO Baosteel LISCO POSCO
Origin	Shanxi/Tisco or Shanghai/Baosteel
HS Code	72199000
Production Capacity	200 Ton Per Week

Product Description

201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
Product Description

Stainless steels are a family of iron based alloys that contain a minimum of 10.5% chromium (CR). The presence of chromium creates an invisible surface film that resists oxidation and makes the material passive or corrosion resistant (stainless). There are multiple families of stainless steel which are designed for various applications and uses. Stainless grades can be further modified to meet various processing, corrosion, temperature and strength conditions.
The main usage for stainless steel is decoration, with finish of BA, 8k Mirror, hairline, Satin No.4, SB, Bead Blast, Etched, Colored etc.; and common grade for these docorative sheets are SS201, 304, 316L, 430;

For 8K Mirror / BA mirror finished sheets,, pls check the following some more introductions:

#8 - Mirror Finish - Polished Stainless Steel

#8 Non-Directional is a high gloss, polished stainless steel that is, as the name implies, non-directional. It is designed for architectural applications; however, artists and others find many creative uses for this mirror finish product. Because of its uniform consistency, #8 Non-Directional is excellent for panel-to-panel matching. It is highly reflective making it suitable for mirrors, wall panels, coping and trim.

SELECTING THE GRADE

#8 Non-Directional polished stainless steel is widely obtainable in Type 304, which is sufficient to prevent corrosion. Type 316 should be used near the seacoast. Low carbon versions of these grades (304L / 316L) should be used when parts are to be welded. For highlights of chemistry and common properties, see Table I in the data sheet.

AVAILABLE SIZES

TK: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 3.0mm processed from cold rolled sheet;

TK: 3.0, 4.0, 5.0, 6.0, 8.0mm processed from hot rolled sheet; very good Mirror finish too;

Size: 1000*2000mm; 1219*2438mm; 1500*3000mm;

FLATNESS

#8 Non-Directional is supplied to the standard commercial allowances of ASTM (American Society for the Testing of Materials).

FABRICATION

To avoid affecting the highly reflective mirror finish surface, joinery should be mechanical. If welding or soldering must be employed, strive to limit it to hidden areas. Heat tint scales and soldering flux residue must be thoroughly removed. #8 Non-Directional is slightly directional. Therefore, it is advisable to orient panels in the same direction.

INSTALLATION

#8 Non-Directional comes with a protective PVC covering that is high grade UV resistant and is designed to withstand the elements for several weeks. Yet it is recommended that this PVC covering be removed immediately after installation to prevent adhesive residue from adhering to the polished stainless steel mirror finish. #8 Non-Directional's appearance is very uniform, but any metal surface, including a painted one, is sensitive to misalignment of panels on differing planes. Please take extra care to install within reasonable tolerances to ensure full benefit of #8 Non-Directional's unvarying appearance. After installation, any rust stains from tools or construction debris must be removed.

MAINTENANCE

#8 Non-Directional is designed to be essentially maintenance free. It will last for decades without requiring attention. Yet it may be appropriate at times to clean the surface in order to maintain its original appearance. Specific stainless steel agents are widely available. For general cleaning, any detergent or ammonia solution is effective. Also, for stains, a sodium carbonate paste with a warm water rinse can be applied. For severe stains, you may use tri-sodium phosphate and caustic soda solutions. More difficult contaminants, like adhesive residue, will come off with pure acetone. Always avoid products containing chloride. Regularly clean out areas where occasional debris may collect, such as gutters.

Other common Specification for stainless steel sheet

201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet

Item	Description
Standard	ASTM A240 304 / AISI304 / SUS304 / DIN1.4301 / GB 0Cr18Ni9
Grade	201/202/S31803/S32205/904L
	304/304L/304H/309S/310S/316L/316Ti/317L/321
	409L/410S/420J1/J2/430 439 441 444 446
Thickness	0.3-6.0mm for cold sheet scope; 3.0-100mm for hot rolled scope
Width&Length	1000mm/1219mm/1500mm/1800mm/2000mm
	Length from cutting, as requirement
Surface	Mill surface: 2B/BA/No.1
	Processing surface: 8k mirror/Hairline/No.4 Satin/Bead blast/Color etched
Protection	Transparent film/ Blue fulm/PVC film or laser film
Package	Standard export package with metal pallet + angle bar protection +
Processing	Edging/Laser(Plasma/Water Jet) cutting/Leveling/Slitting

Products Show
201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
Other Common Surface finished Hairline, Satin, Vibration etc.
201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
201 304 316L Mirror Etched finish PVC Laser film stainless steel sheet
The reason why you choose Tianjin TEDA GanghuaISO&SGS&BV Audited companyAdvanced production line and inspection equipmentFinished Product Inventory: More Than 800 Tons.Prompt delivery from stock.Convenient transportationWe can offer competitive price with best quality&serviceMore than 10 years export experienceMore than 20 years industry experienceMore than 30 countries worldwide customersIf you are interested in our products, pls feel free to contact us, we will try our best to support Our business, expect our cooperation chance.